The Chevrolet Buick GMC Certified Pre-Owned Advantage
If you're in the market for a pre-owned vehicle you can feel at ease with MacMaster Chevrolet's Certified Pre-Owned Advantage. Our Chevrolet, Buick and GMC vehicles come with multiple benefits that will keep you worry-free. With the Certified Pre-Owned Advantage your vehicle will come a 150+ Point Inspection, a Manufacturer's Warranty, 24-Hour Roadside Assistance and an Exchange Privilege just in case you're not satisfied with your vehicle.
Certified Pre-Owned Benefits
IDENTIFY OUR CPO VEHICLES
When browsing our Certified CPO inventory we'll have the logo at the bottom of our vehicles so that you know it qualifies for the CPO benefits. To browse our CPO inventory click here.
CERTIFIED MANUFACTURER'S WARRANTY
Just because our vehicles are pre-owned, it doesn't mean we love them any less. We back our vehicles with a Certified Manufacturer's Warranty so you can have peace of mind when you think about all the places you'll go instead of all the places it's been. As standard you will receive also receive a minimum of 3 months or 5,000 kilometers (whichever comes first) Used Vehicle Limited Warranty when you purchase a Certified Chevrolet, Buick or GMC Pre-Owned Vehicle. If your budget permits, you can also extended or upgrade to a more comprehensive CPO Protection Plan. If you ever decide to sell your vehicle, you'll be able to transfer any existing warranties to its new owner.
CERTIFIED 150+ POINT INSPECTION
With our Certified Pre-Owned Chevrolet, Buick and GMC vehicles, you'll never have to worry about the condition of your hose clamps, the vacuum system, or brake pads. Before they reach our sales department, each vehicle is carefully inspected by our factory trained mechanics. This means by the time you look at them, every vehicle has passed our 150+ point inspection. To see what the 150+ point inspection includes see below:
Check the vehicle mileage against service records for accuracy.
ENGINE COMPARTMENT
Hood release, hinges, prop rod or gas struts provide proper operation.
Check finish (rust, corrosion).
ENGINE CONDITION & NOISE
Verify original equipment and displacement
Valve cover/cylinder head/exhaust manifold gaskets soundness
Condition of engine belts, automatic tensioner, hoses, wires and no squeaking belts
Condition of hose clamps, retainer clips, and wire casings
Look for areas of concentrated dirt or grime
Check for fluid leaks or valvetrain noise
Vacuum system condition
Fuel delivery system
ENGINE OIL LEVEL/CONDITION
Check engine oil level, verify oil clarity and viscosity.
ENGINE COOLANT LEVEL/CONDITION
Check radiator for leaks and damage/fan shroud is securely in place
Verify that blades of cooling fans are not broken or bent
Check coolant level, freeze protection rating
AIR FILTER INSPECTION
Inspect air filter/filter housing for debris (leaves, bugs).
BATTERY LOAD TEST
Inspect battery for cracks. Clean and inspect battery top, posts & cables
Measure battery voltage/conduct load test
IGNITION SYSTEM
Inspect system for loose, cracked or burned wires.
Check wire for short circuits and arcing
POWER STEERING FLUID LEVEL
Inspect power steering fluid level
BRAKE FLUID LEVEL
Locate and inspect master cylinder reservoir, check brake fluid level
AUTOMATIC TRANSMISSION FLUID LEVEL & CONDITION
Check all ranges from "Park" to "1st" for proper engagement.
FUEL SYSTEM
Inspect fuel injection system for proper operation
Check fuel system for leaks or loose wires and lines
Inspect evaporative emissions for proper operation
MANUAL TRANSMISSION FLUID LEVEL
Measure fluid level, clarity and viscosity (if equipped).
MANUAL TRANSMISSION HYDRAULIC CLUTCH FLUID LEVEL
Check clutch fluid reservoir for proper level.
WASHER FLUID LEVEL
Inspect/fill washer fluid reservoir (front)/(rear, if equipped).
STARTER PERFORMANCE (AUTOMATIC TRANSMISSION)
Check that starter only operates in "Park" or "Neutral".
STARTER PERFORMANCE (MANUAL TRANSMISSION)
Starts only when clutch pedal pressed all the way down (GM Vehicles).
OnStar® system - verify connection to OnStar® with blue button push
SRS system warning light/self test
ABS system warning light/self test
INSTRUMENT PANEL
Instrument panel/gauge lights and operation
Electronic instrument cluster, Head-up Display operational (if equipped)
CLIMATE CONTROL
HVAC/Front and Rear Electronic Climate Control (if equipped)
All climate control directional functions/vents working properly
Confirm Cabin Air Filter is clean
AUDIO/VIDEO SYSTEM
Audio controls, speakers, steering wheel controls (if equipped)
Power antenna (if equipped)
DVD player operational (if equipped)
Navigation system operational (if equipped)
Infotainment Systems verify operation of system with Multimedia Interface Tool (MIT Tool) , display screen, USB, Bluetooth, AUX jack,
etc., (if equipped)
WINDSHIELD WIPER/WASHER OPERATION
Front wiper/washer controls are operational
Front wiper blades
Rear wiper/washer controls are operational (if equipped)
Rear wiper blade (if equipped)
ELECTRIC REAR WINDOW DEFROSTER OPERATION
Defroster switch/heating grid operation
HORN OPERATION
Horn operation/sound quality
LIGHTER/POWERPOINT OUTLETS
Cigarette lighter, USB, AUX, powerpoints operational
TILT STEERING WHEEL (IF EQUIPPED)
Steering wheel locks in each tilt position
Confirm operation of heated steering wheel (if equipped)
INSIDE REARVIEW MIRROR
Rearview mirror adj., range of movement, Auto dim (if equipped)
Map/Reading lights (if equipped)
WINDOWS
Power windows and controls are operational (if equipped)
Sliding rear window/vent windows (if equipped)
OUTSIDE MIRROR CONTROLS
Check mirrors for full movement in all directions
Inspect mirrors for clarity, scratches or cracks
Heated Mirrors/Personal Memory systems function (if equipped)
POWER SUNROOF OPERATION (IF EQUIPPED)
Sunroof opens, tilts and closes properly
Check sunroof track for any obstructions or damage
Check sunroof seals for any cracks or damage
REMOVABLE ROOF PANELS (IF EQUIPPED)
Roof panel latches
Check roof panel weather stripping for cracks or damage
CONVERTIBLE TOP OPERATION (IF EQUIPPED)
Headliner condition (if equipped)
Check roof structure for bent rods or damage
Top opens and closes fully
Rear window, glass or plastic condition
Convertible top seals and clamps
SEAT FABRIC AND TRIM CONDITION
Inspect vehicle seats for wear, stains or tears
Passenger compartment trim panels fit and finish
Headliner fit and condition
SEAT ADJUSTMENT
Driver and Passenger seat tracks are operational
Adjustable head restraints (if equipped)
Folding rear seatback/Valet Lockout feature (if equipped)
Driver/passenger/rear seat controls are operational
SAFETY BELT CONDITION/INTEGRAL CHILD SEAT OPERATION
All seat belts are operational
Inspect safety belt webbing and buckles at all seating positions
Height adjustable shoulder belts work correctly (if equipped)
Check that integral child seat is operating properly (if equipped)
Inspect all child seat hardware and latches
SUN VISOR OPERATION AND CONDITION
Sun visors are operational
INTERIOR/COURTESY LIGHT OPERATION
Check that all interior lights/switches are operational
REMOTE DECKLID/LIFTGATE RELEASE OPERATION
Check operation of decklid/liftgate during remote release
Inspect weather seal for damage
Decklid pull down feature (if equipped)
REMOTE FUEL FILLER DOOR RELEASE OPERATION (IF EQUIPPED)
Inspect operation of the remote fuel filler door release feature
Interior fuel door switch, release mechanism working properly
Confirm capless fuel filler is intact and working correctly
ASHTRAY
Inspect ashtray for broken, bent, or melted components
GLOVE BOX OPERATION
Inspect latch, lock, and hinges for proper operation
DOOR TRIM AND LOCK OPERATION
Check that all doors open and close smoothly
Inspect operation manual or power door locks, rear door security lock
Check that doors cannot be opened in the “Locked” position
Check hand held remote transmitter operational (if equipped)
Check all interior/exterior door handles for damage
Check and confirm child door lock operation
Inspect fit and finish of each door trim panel, armrest, assist strap
CARPET AND FLOOR MAT CONDITION
Inspect carpet and floor mats for burns, dirt, excessive wear
CARGO AREA
Inspect cargo area trim panels for fit and finish
Cargo area, door lock switch operation, powerpoint power (if equipped)
SPARE TIRE CONDITION/JACK & WRENCH LOCATION
Inspect spare tire and wheel condition
Inspect that all tools needed for spare tire change are intact, or if
equipped with spare tire delete, the fill kit is available
HEAD LAMP/FOG LAMP OPERATIONS
Headlamp switch, High/Low beam is functional
Headlamps are aimed properly
Twilight/headlamp delay feature OK (if equipped)
Fog lamps are aimed and functional (if equipped)
PARKING/BRAKE/BACK UP/TURN & SIDE MARKER LAMPS
Front and rear parking lamps
Brake and backup lamps
Left/Right turn signal lamps
HAZARD WARNING LIGHTS
Hazard warning lights work with vehicle running/not running
WHEEL AND TIRE CONDITION
(INSPECT PRE TEST DRIVE AND IN SERVICE BAY)
Tires meet 4/32” minimum requirement
Tire build dates (DOTs) within 6 years
Wheel covers/wheel centre hubs OK (if equipped)
Tire side walls, valve stems, and wear pattern
Tire size/correct air pressure/lug nuts secured
Inspect wheel rims for damage
SHOCK ABSORBER TEST
Front shock absorbers/strut assembly
Rear shock absorbers/strut assembly
BRAKE SHIFT/TRANSMISSION INTERLOCK
(AUTOMATIC TRANSMISSION)
Gear selector cannot be moved out of Park unless brake is applied
TRANSMISSION OPERATION (AUTOMATIC)
Transmission gear engagement/shift points are smooth
TRANSMISSION OPERATION (MANUAL)
Clutch pedal/gear shift engagement
Inspect transmission for noise
ENGINE PERFORMANCE
Engine driveability/performance
BRAKE OPERATION
Power assisted braking system is functional
Rear parking assistance monitor operational (if equipped)
Anti-lock brake system warning/self-test light is functional
Anti-lock brake system functional (if equipped)
Vehicle tracks straight under hard braking conditions
SUSPENSION/DRIVETRAIN/NOISE
VIBRATION HARSHNESS
Inspect for abnormal vehicle noise, windnoise, vibrations or harshness
CORNERING ABILITY
Vehicle cornering dynamics
Inspect for vehicle abnormal body roll
CRUISE CONTROL (IF EQUIPPED)
Cruise control holds a set speed/adjustments work properly
Haptic seats
Audible warnings
Collision Alert
Cross Traffic Alert
Side Blind Zone Alert
Adaptive Cruise
Lane Centering
Super Cruise
Front and Rear Park Assist
Front and Rear Camera
180 Bird's eye view Camera
TRANSMISSION CASE INSPECTION
Transmission case/pan structurally sound
MANUAL TRANSMISSION FLUID LEVEL AND CONDITION
Fluid level, clarity and condition
TRANSFER CASE (4-WHEEL DRIVE AND AWD MODELS)
Fluid level, clarity and condition
Transfer case/skid plate structural condition
BRAKE SYSTEM CONDITION
Brake rotor/drum surfaces
Brake pads/shoes have 40% or more remaining pad life
Brake shoes have 40% or more remaining life
Parking brake operation
ENGINE MOUNTS/FRONT SUSPENSION LINKS & BUSHINGS
Inspect all engine mounts, grommets and bushings
Front suspension links/sway bar/mounts
STRUTS AND SHOCK ABSORBER CONDITION
Shock absorbers/struts free of leaks and damage
STEERING SYSTEM CONDITION
Inspect structural condition of all steering system elements
CV JOINT DUST BOOT CONDITION
CV dust cover boot void of rips/damage
DRIVE AXLE, AXLE FLUID LEVELS
Inspect differential case for fluid leaks
Front/Drive axle fluid level
FUEL TANK SYSTEM CONDITION
Fuel tank and delivery lines are sound, no fuel odour
VEHICLE/STRUCTURAL DAMAGE
Inspect for signs of collision damage
EXHAUST SYSTEM
Exhaust system hung/routed properly, meets structural integrity, exhaust tone
ENGINE OIL AND FILTER CHANGE, CHASSIS LUBE
Lubricate all chassis points, perform engine oil and filter change
Confirm that the vehicle can be charged with a level 2 charger
Confirm (if equipped) that the vehicle can be charged with the High Voltage DC charger
WINDOW GLASS
Inspect all glass surfaces for chips and cracks
HOOD CONDITION
Inspect hood for proper alignment with fenders, grille, and fascia
Inspect hood’s finish for dents and scratches
GRILLE, FRONT BUMPER, AND FASCIA CONDITION
Check that bumper guards and rubstrips are securely fastened
A Check grille, front bumper, or fascia alignment/condition
Vehicle is free from road tar and tree sap
DRIVER SIDE FENDER, DOOR(S), QUARTER PANEL CONDITION
Inspect for panel alignment, finish quality, previous body work
Weather seals, placement/condition
Bodyside mirrors, mouldings and badging properly secured
DECKLID, LIFTGATE, TAILGATE OR REAR CARGO DOOR CONDITION
Inspect the rear body panel surfaces for dings, dents and scratches
Decklid, liftgate or rear panel doors
Weather seals, placement/condition
Pickup tailgate/bed/side rails (if equipped)
Inspect bedliner
REAR BUMPER/FASCIA CONDITION
Inspect all rear trim components for proper fit, or collision damage
Check that all bumper guards and rubstrips are securely fastened
PASSENGER SIDE FENDER, DOOR(S) QUARTER PANEL CONDITION
Inspect areas for panel alignment, finish quality, or previous body work
Weather seals, placement/condition
Bodyside mirrors, mouldings and badging properly secured
ROAD ANTENNA
Inspect mast antenna, antenna secured
Interior compartment has been cleaned
Vehicle exterior has been washed
CERTIFIED EXCHANGE PRIVELEGE
Our goal at MacMaster Chevrolet is to ensure you're completely satisfied with your Certified Pre-Owned Chevrolet, Buick or GMC. If for any reason you're not, you can exchange it within the first 30 days or 2,500 kilometers, whichever comes first.
EXCHANGE POLICY
If for any reason you're not completely satisfied with your Pre-Owned vehicle, you can exchange it within the first 30 days or 2,500 kilometers (whichever comes first) from the date it was purchased for any other eligible CPO vehicle. If the purchase price of the replacement vehicle is less than the vehicle being returned, you'll receive a credit for the different.
ELIGIBILITY
Unless specified, all CPO vehicles are eligible for the Exchange Privilege during the first 30 days or 2,500 kilometers of ownership. The exchanged vehicle must meet the following criteria:
- The vehicle must currently be owned or leased by the retail purchaser/lessee of the CPO
- The vehicle must be returned in the condition in which it was delivered to the customer, without damage or excessive wear and tear
CERTIFIED ROADISDE ASSISTANCE
It's going to be a worry-free ride, especially knowing that you're covered with a minimum of 3 months or 5,000 kilometers (whichever comes first) of 24-hour roadside assistance. At MacMaster Chevrolet you're covered if:
- Your CPO vehicle is still within the manufacturer's New Vehicle Warranty Period.
- Your warranty-covered non-GM vehicle doesn't have a Roadside Assistance Program. In this case we'll provide 3 months or 5,000 km (whichever comes first) of GM Roadside Assistance from your purchase date.
- Your CPO vehicle has less than 3 months and 5,000 km of remaining Manufacturer's New Vehicle Limited Warranty. We'll provide an additional 3 months or 5,000 km (whichever comes first), of GM Roadside Assistance once your remaining Manufacturer's New Vehicle Limited Warranty expires
If your vehicle is disabled and you are a minimum of 250 km from home, a trip interruption reimbursement allowance will be provided to help for for:
- Reasonable expenses up to a maximum of $195 per day and/or
- Alternate transportation up to a combined maximum of $500 per incident.
If you need Roadside Assistance, simply call 1-800-268-6800 and a service operator will be dispatched to the scene.